PANEL JOLLY
Green steel element for 90° inner corners.
Dimension [cm] | Area [m2] | Weight [kg] |
300 x 30 x 10 | 1,2 | 63 |
150 x 30 x 10 | 0,6 | 37 |
SECTION FOR SCARP WALL
Red steel element, which services as a substitute for any criteria that can not be achived with other structural formats. It is also used for building walls at an angle of 15°.
Dimension [cm] | Area [m2] | Weight [kg] |
5 x 10 x 300 | 0,15 | 21 |
5 x 10 x 150 | 0,07 | 12 |
DRILLED PIPE FOR PINS/BARS
Red steel element, which serves as a replacement for any size that can not be reached with other panels. It is also useful for balancing panels over a height of 4,5 m, where it is attached to the panels using an adjusting console.
Dimension [cm] | Area [m2] | Weight [kg] |
5 x 10 x 300 | 0,15 | 21 |
5 x 10 x 150 | 0,07 | 12 |
REMOVING BLOCK
A red steel element made of two 5 x 10 conical profiles joined together. Its use facilitates the formation of closed walls.
.
Dimension [cm] | Area [m2] | Weight [kg] |
10 x 10 x 300 | 0,3 | 36 |
10 x 10 x 150 | 0,15 | 20 |
COMPLETE BIOCONICAL BLOCK
Red or green steel element, consisting of three pointed parts that form an angle of 25 x 25 x 300. The element is indispensable for making the upper deck inside the shaft for an elevator, an underground shaft, etc., because it allows complete disassembly of the structure.
.
Dimension [cm] | Area [m2] | Weight [kg] |
25 x 25 x 300 | 0,3 | 38 |
INNER HINGE FOR ANGLES
An element made of colored steel, suitable for sharp and wide angles up to 50°and above. It can be attached with the help of a linking clamp.
Dimension [cm] | Area [m2] | Weight [kg] |
28 x 28 x 300 | 1,68 | 78 |
28 x 28 x 150 | 0,84 | 40 |
OUTER HINGE FOR ANGLES
An green element made of steel, which in used for sharp and wide angles of 50°. It can be attached with the help of a linking camp.
Dimension [cm] | Area [m2] | Weight [kg] |
10 x 10 x 300 | 0,3 | 52 |
10 x 10 x 150 | 0,3 | 27 |
HINGE STIFFENING PIPE
Element izdelan iz jekla zelene barve, ki je uporaben za potrditev zunanjega vogala pričvrščenega na ploščo, s pomočjo izravnalne konzole.
Dimension [cm] | Area [m2] | Weight [kg] |
/ | / | 15 |
STANDARD CLAMP
Element made of galvanized steel with adjustable opening from 5 to 30 cm. It is used to block two panels together to make 90° outer corners as well as elements with spare parts on inner corners or walls.
Dimension [cm] | Area [m2] | Weight [kg] |
/ | / | 7,54 |
ALIGNER CLAMP
An element of galvanised steel, used to clamp a pair of formworks or to connect steel or wooden compesating elements (with dimensions ranging 5 to 10 cm) to them.
Dimension [cm] | Area [m2] | Weight [kg] |
/ | / | 5,56 |
MODUL SUPPORTING STIRRUP
Red painted steel with adjustable height, used to support the formworks for elevation castings. It is fixed to the wall by means of thteaded bars and nut plates. NOTICE: lay the panel 5 to 20 cm underneaths the preceding cast.
Dimension [cm] | Area [m2] | Weight [kg] |
/ | / | 12 |
ALIGNER STIRRUP
An galvanized steel element, used to block the wooden beams h 20 with strengthened head.
Dimension [cm] | Area [m2] | Weight [kg] |
/ | / | 5,56 |
PANEL LIFTING HOOK
The lift hook has 550 kg service capacity with rope at 60° angle in relation to its vertical axis. Use always two hooks to move panel assys.
Dimension [cm] | Area [m2] | Weight [kg] |
/ | / | 6,5 |
SERVICE CONSOLE
The console of red painted steel that can be hooked to the holes of the horizontal or vertical beams, with safety device against lifting. It is also suitable for fences.
Dimension [cm] | Area [m2] | Weight [kg] |
/ | / | 11,38 |
STEEL MOUNTING TO CLOSE CONSOLE SIDE
An element of red painted steel, used to be hooked to the service console at the end of the wall. It ensures the laying of the foot stop plates.
FOOT STOP PLATE AND RAILING
Plate of red painted steel, used to hook the two plates between the closing mouting and the service console at the end of the platform.
PIN (SHORT AND MEDIUM)
An galvanized steel, used to block the one brace of formworks or accessories.
Dimension [cm] | Area [m2] | Weight [kg] |
L = 90 | / | 0,2 |
L = 135 | / | 0,5 |
ADJUSTABLE PIN
Element made of galvanized steel, used to block panels with compensations up to 11 cm.
Dimension [cm] | Area [m2] | Weight [kg] |
/ | / | 0,78 |
WEDGE FOR PINS
Galvanized steel, used with the pin.
Dimension [cm] | Area [m2] | Weight [kg] |
/ | / | 0,16 |